Русский

Для русскоязычных посетителей сайта

Русский

فارسی

برای مشاهده وب سایت فارسی شرکت لطفا کلیک کنید

فارسی

English

Click here for the English version on the website

English

Soft

2K easy-sanding multi-functional polyester putty

Carcoat Soft is a polyester-based putty product that fills medium to deep surface imperfections, such as dents and scratches. The putty has a creamy, smooth consistency that makes applying simple.

The surface should be sanded and then degreased with a cleaning solvent.

Mix homogeneously with sufficient hardener (2-3%). Pot life: 3-5 mins.

Apply the putty with putty spatulas, flexible rubber or plastic spreaders.

Drying time: 20-30 mins, at a temperature close to 20°C.

Sand with P80 - P120 grit until the desired surface is obtained and finish with P120 - P240

Wear respiratory protection during application

Frequently Asked Questions About This Putty

Characteristics

• Easy to sand
• Highly concentrated filler
• High degree of fineness
• Very easy and pore-free to work
• High adhesion to the surface
• High filling power and flexibility

The Available Packaging

• 1 Kg • 2 Kg • 500 gr

Caution

For professional use only. Do not return unused mixed material into the can. Make applications where ventilation is sufficient. Keep away from heat, sparks, flame, hot surfaces. Vapors may cause flash fire. Causes eyes and skin irritation. Do not breathe vapors. Use required personal protective equipment. In case of contact with eyes or skin, rinse immediately with plenty of water. For more information see the SDS.

Physical Characteristics

• Color: Beige
• Basis: polyester resin with a pigment-filler-combination
• Drying time (at 20°C, 50% relative air humidity): 20-30 min
• Pot life / Working time at 20°C: 3-5 min
• Color of hardener: Red
• Delivery viscosity at 20°C: as a paste
• VOC content: 2004/42/IIB (b) (250) < 250g/l
• Minimum application temperature: +5°C

Storage

It should be kept in a tightly covered container, in a dry and ventilated place, avoiding direct exposure to sunlight. Temperature above 5°C is recommended, Temperature between 15 and 30°C is optimal. Improper storage conditions shorten the shelf life of the product.

Volatile Organic Compounds

The VOC content of this putty is a maximum of 250 g/l in compliance with European standard 2004/42/CE IIB(B) (250) <250 g/l.

 
HARDENER PERCENTAGE
Hardener Percentage Temperature
Benzoyl Peroxide Paste 50% 3% 5-10°C
Benzoyl Peroxide Paste 50% 2% 10-20°C
Benzoyl Peroxide Paste 50% 1% >20°C

Related Products